Other

TO FIT 718 S4  OFF 1800HOUR 2021 FENDT 718

TO FIT 718 S4  OFF 1974 HOUR 2021 FENDT 718

ALL IN VERY GOOD WORKING ORDER

USED  GRAZIANO THINK IT FITS A JCB 8250

ALL COMPLETE 540RPM SHOP SOILED

LAST TESTED 2020  13/6/38 WHEELS WORKS OK

3 POINT LINKAGE

IN 2 X FORCED STEERING 50MM BALL HITCH FOR FENDT 828 ALSO PIN TYPE  PRICE FOR ALL  USED

IN VERY GOOD CONDITION

CAPACITY 10T  LOW GROUND PRESSURE 6MM HOPPER BOLT-IN EXTENSIONS GALVANISED HD CHASSIS RHS CONSTRUCTION C/W  PUSH BAR  FOLDING HYDRAULIC CONVEYOR WITH ROAD SAFETY LOCKS  REACH 1700MM FROM FACE OF 800/65R32  HYDRAULIC TILTING  CONVEYOR FILL HEIGHT -1850MM LOAD COMPENSATED HYDRAULIC BELT CONTROL ENSURING BELT SPEED CONSTANT REGARDLESS OF LOAD GALVANISED CONVEYOR REMOVABLE STAND ADJUSTABLE SWIVEL HITCH MUDGUARDS  LED LIGHTS  406X120 HIGH SPEED BRAKES 120X120MM SQUARE BEAM AXLE 800/65R32 TYRES

OPTIONAL EXTRAS

VIBRATOR OPTION FRONT & REAR ON SWITCH BOX CONTROL £1,700

AIR BRAKES £750

CAPACITY 7T  6MM HOPPER BOLT-IN   PUSH BAR  FOLDING HYDRAULIC CONVEYOR WITH ROAD SAFETY LOCKS  REACH 1700MM FROM FACE OF TYRE  HYDRAULIC TILTING  FILL HEIGHT 1850MM  REMOVABLE STAND ADJUSTABLE SWIVEL HITCH  LED LIGHTS HYDRAULIC BRAKES BEAM AXLE 750/65R26 TYRES

OPTIONAL EXTRAS

VIBRATOR OPTION FRONT & REAR ON SWITCH BOX CONTROL £1,700

AIR BRAKES £750

• 4m3 to water level
• Unique 3 Degree Floor Angle
• Unique Zero Maintenance Stainless Steel Roller Floor No Greasing Or Oiling
• SD-A Stainless Steel Salt & Grit Applicator (height, spread width & spread pattern adjustable)
• Manual Hydraulic Floor Drive
• In Cab Monitor Showing Floor & Disc Speed
• Stainless Steel Manual Rear Door
• Hydraulic Brakes
• 400 x 80 Brakes – 90mm square axle – 10 Stud
• Stainless Steel 25mm Internal Mesh Grids
• Shot Blasted, Primed in 2K Primer, Oven Baked, Painted In 2K Paint & Oven Baked For A Hardened Finish (SP Yellow)
• Steps & Platform
• Height Adjustable Bolt On Swivel Hitch

• 6m3 to water level
• Unique 3 Degree Floor Angle
• Unique Zero Maintenance Stainless Steel Roller Floor No Greasing Or Oiling
• SD-A Stainless Steel Salt & Grit Applicator (height, spread width & spread pattern adjustable)
• Manual Hydraulic Floor Drive
• In Cab Monitor Showing Floor & Disc Speed
• Stainless Steel Manual Rear Door
• True Suspension Drawbar (Approx 80mm Of Travel)
• Dual Air / Hydraulic Brakes
• 406 x 120 Brakes – 120mm square S cam commercial axle – 10 Stud
• Stainless Steel 25mm Internal Mesh Grids
• Shot Blasted, Primed In 2K Primer, Oven Baked, Painted In 2K Paint & Oven Baked For A Hardened Finish (SP Yellow)
• Commercial Running Gear
• 600/55R26.5 BKT Ridemax Tires
• Steps & Catwalk
• Durable Plastic Mudguards
• Toolbox
• Height Adjustable Bolt On Swivel Hitch

10.5 CU YARD (7.5 M3) 550/60/22.5 TYRES UNIQUE 5 AXIS ROTOR WITH 5 ROWS OF CHAINS FOR LOWER POWER REQUIREMENT AND FINER CHOPPING 5MM LID/6MM ENDS/5MM BARREL/5 HINGE POINT ON HYDRAULIC LID 8 STUD AXLE HYDRAULIC BRAKES 2K PAINT FINISH SUPERB QUALITY FINISH PROBABLY THE BEST THERE IS IN BARREL SPREADERS

DRIVEN WINCH CAME OFF MF 165

TO SUIT FENDT 700 SCR 2011-2015 HARDLY USED MAIN HITCH ALL COMPLETE BUT SOME CABLE/PIPES/BOLTS MISSING AND ONLY HOOK WITH IT – USE BITS FROM YOUR WORN HITCH TO COMPLETE (STK 6260) 711U

TO SUIT FENDT 900 SCR 2011-2015 HARDLY USED MAIN HITCH ALL COMPLETE BUT SOME CABLE/PIPES/BOLTS MISSING AND ONLY HOOK WITH IT – USE BITS FROM YOUR WORN HITCH TO COMPLETE (STK 6261) 850U

TO SUIT FENDT 700 SERIES S4 VERSION  2000 HR VERY GOOD COMPLETE BUT SOME CABLE/PIPES/BOLTS MISSING AND ONLY HOOK WITH IT – USE BITS FROM YOUR WORN HITCH TO COMPLETE (STK 6269) 714U

TO SUIT FENDT 700 SERIES S4  2000+ HR VERY GOOD COMPLETE BUT SOME CABLE/PIPES/BOLTS MISSING AND ONLY HOOK WITH IT – USE BITS FROM YOUR WORN HITCH TO COMPLETE (STK 6270) 714U

TO SUIT FENDT 700 SERIES SCR  VERY GOOD COMPLETE BUT SOME CABLE/PIPES/BOLTS MISSING AND ONLY HOOK WITH IT – USE BITS FROM YOUR WORN HITCH TO COMPLETE (STK 6271) 714U

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER P57282 VERY GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W HOOK (STK 6272) P57282

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER P57282 VERY GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W HOOK (STK 6273) P57828

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER P57282 4000 + HOURS GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W HOOK (STK 6274) 

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER P57282 4000 + HOURS GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W DRAW BAR (STK 6275) 

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER P57838 3000 + HOURS GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W HOOK (STK 6276) P57838

LINKAGE LIFT BARS / HYDRAULIC PUSH OUT PART NUMBER 2091/2090 4000 + HOUR GOOD CONDITION  COMPLETE BUT MAYBE SOME PIPES/BOLTS / FITTINGS MISSING  – USE BITS FROM YOUR WORN HITCH  C/W DRAW BAR (STK 6331)